Ignition ranges

What the ignition ranges mean.

A Porsche DME over-rev report lists ignition ranges from the DME. A 986 or 996 has two. A 987 or 997 has six. Operating hours on that same screen is the engine-hour counter. It is separate from the hour stamped on each range.

The RPM labels below are the ones already in Revvy. Where Durametric’s pages disagree, the note says which page the reading follows.

Two ranges on the 986 and 996

Durametric’s 986 and 996 troubleshooting page describes range 1 as rev-limiter usage and range 2 as a mechanical over-rev. It does not publish RPM numbers for either range, so Revvy leaves those cells blank.

RangeRPMWhat the source says
1Not publishedRev-limiter usage. Durametric says every spark ignition at the rev limiter increments this counter. No RPM number is published.
2Not publishedMechanical over-rev. Durametric says this counter increments when a downshift exceeds the rev limiter. No RPM number is published.

The 986/996 troubleshooting page and the v5 manual describe two counters — at the rev limiter, and past it — and do not publish RPM numbers. Seconds are left blank so a limiter speed is not invented. The manual says these 986/996 counters stop at 65,535.

Six ranges on the 987 and 997

The 987 and 997 troubleshooting page publishes six ranges. The count is spark ignitions. Range 6 is the mechanical over-rev: a downshift past the rev limiter. Range 1 starts at 7,300 rpm on the 911 and at 7,200 rpm on the Boxster (987) and Cayman.

911 (997)

RangeRPMWhat the source says
17,300–7,500 rpmIgnitions Durametric records in this RPM band. On the 911 the troubleshooting page starts range 1 at 7,300 rpm.
27,500–7,700 rpmIgnitions Durametric records in this RPM band.
37,700–7,900 rpmIgnitions Durametric records in this RPM band.
47,900–8,400 rpmIgnitions Durametric records in this RPM band.
58,400–9,500 rpmIgnitions Durametric records in this RPM band.
69,500 rpm and aboveDurametric describes range 6 as a mechanical over-rev: a downshift that drives the engine past the rev limiter. The count is spark ignitions.

911 bands are from Durametric’s 987/997 troubleshooting page: range 1 is 7,300–7,500 rpm. Ranges 2–5 match that page and the v5 instruction manual. Range 6 is “9,500 and up” on the troubleshooting page; the manual lists 9,500–11,000 rpm. This reading does not fill in a ceiling the troubleshooting page left open. Durametric does not publish a separate table for Carrera, Carrera S, Targa, GTS, or for 997.1 versus 997.2.

Boxster (987) and Cayman

RangeRPMWhat the source says
17,200–7,500 rpmIgnitions Durametric records in this RPM band. On the Boxster (987) and Cayman the troubleshooting page starts range 1 at 7,200 rpm.
27,500–7,700 rpmIgnitions Durametric records in this RPM band.
37,700–7,900 rpmIgnitions Durametric records in this RPM band.
47,900–8,400 rpmIgnitions Durametric records in this RPM band.
58,400–9,500 rpmIgnitions Durametric records in this RPM band.
69,500 rpm and aboveDurametric describes range 6 as a mechanical over-rev: a downshift that drives the engine past the rev limiter. The count is spark ignitions.

Boxster (987) and Cayman bands are from the same troubleshooting page. Range 1 is 7,200–7,500 rpm there, while the 911 starts at 7,300. The v5 manual lists 7,300–7,500 for the 997, Boxster (987), and Cayman and does not make that split. This reading follows the troubleshooting page. Durametric does not publish separate base and S tables.

Durametric’s ECU Information page says a Siemens SDI3 shows six ignition ranges and the hour of the last entry. That page does not list RPM numbers.

Operating hours, and the hour on a range

Operating hours is the counter for the whole engine. The hour on a range is the operating hour of the last ignition in that range. The v5 manual shows the line as “Number of ignitions range 1: 1524 / 283h”: 1,524 ignitions, the last one at 283 operating hours. The troubleshooting pages describe that hour the same way.

Revvy’s sample paste for a 2006 Carrera S reads operating hours 962.8, with ranges 1 and 2 stamped 804.1h. The report keeps 962.8 as the engine-hour counter and treats 804.1 as the stamp, so the last event was 158.7 engine hours earlier.

Sample paste of a Porsche DME over-rev report for a 2006 Carrera S, with six ignition ranges and operating hours of 962.8.
Figure. The sample paste Revvy already ships for a 2006 Carrera S. It follows the field layout in the v5 manual. It is not a Durametric screen.
Revvy report of a Porsche DME over-rev report for a 2006 Carrera S, with the published range bands, ignition counts, and the engine-hour counter at 962.8.
Figure. The same paste as a Revvy report. The counter and the stamp on each range stay separate.

Durametric’s pages: 986 and 996 troubleshooting · 987 and 997 troubleshooting · Instruction manual v5 · ECU Information

The steps to get this screen out of the software and into Revvy are on How it works.

Translate a report